This book is a continuation of CATIA V5-6R2015-Part I. The topics covered in this book are listed below: Basic Sketch Based Features -Pad -Shaft -Project 3D Elements -The Plane command -Offset from plane -Parallel through Point -Through three points -Through two lines -Through point and line -Through planar curve -Normal to curve -Tangent to surface -Equation -Mean through points -Coordinates -On curve -On Plane -On Surface -Circle/Sphere/Ellipse center -Tangent on curve -Between -Line -Additional options of the Pad and Pocket commands -Limits -Thick -View commands -Measure Commands Holes and Dress-Up Features -Hole -Simple Hole -Counterbored Hole -Countersunk Hole -Tapered Hole -Threaded Hole -The Thread/Tap command -The Edge Fillet command -Limiting element(s) -Blend corner(s) -Variable Radius Fillet -Chordal Fillet -Face-Face Fillet -Tritangent Fillet -The Chamfer command -Draft Angle -Draft Reflect Line -Variable Angle Draft -Shell Patterned Geometry -The Mirror command -Rectangular Pattern -Circular Pattern -User Pattern -Scaling -Affinity Rib Features -The Rib command -The Slot command Multi Section Solids -The Multi-sections Solid command -Types of the Cross-sections -Couplings -Spines -Guides -Relimitation -Removed Multi-sections Solid Additional Features and Multibody Parts -Stiffener -Solid Combine -Multi-body Parts -Creating Multi-bodies -Insert in new body -Assemble -Add -Remove -Intersect -Union Trim -Remove Lump Modifying Parts -Edit Sketches -Edit Feature Definition -Edit Feature Parameters -Deactivate Features -Activate Features -Changing the Sketch Support

Mode of access: World Wide Web